8.1.1
Messages
Messages provide information about the machine’s status and minor errors.
8.1.2
Errors
Errors must be corrected before operation can be continued.
Press
Enter
to acknowledge the error/message.
#
Error message
Explanation
Action
7
Information
Action not allowed by
operation mode.
Operation mode does not
allow editing.
Change operation mode
to a higher level, eg.
Configuration
.
47
Information
The method step is
active in the process.
Some parameters
cannot be edited.
The selected method step is
active. You cannot edit some
parameters.
Stop the process or wait
until the current step is
finished.
54
Information
The process is paused.
This might affect
removal accuracy. For
the greatest accuracy
start a new process.
When the process is paused a
new reference point will be
calculated for the remaining
removal, and this will affect
the overall accuracy of the
desired removal.
Press OK to continue.
Press
Stop
to cancel the
process.
133
Information
Lubricant restricted by
selected surface and
suspension.
The selected lubricant cannot
be used with the selected
surface and suspension.
Select another lubricant.
For user defined
consumables, make
sure that the correct
consumable rule is
assigned.
134
Information
Suspension restricted
by selected surface.
The selected suspension
cannot be used with the
selected surface.
Select another
suspension.
For user defined
consumables, make
sure that the correct
consumable rule is
assigned.
8 Troubleshooting - AbraPol-30
AbraPol-30
49
