6.3.5
Options
From the
Options
menu you set up general options for e.g. display, language, disc size, etc.
•
If needed, you can reset some settings to their factory default value:
Press function key
F1
when the value is highlighted.
Option
Setting
Display brightness
You can adjust the display to make it easier to view.
Language
Select the language you wish to use in the software.
Keyboard sound
•
Yes
:
When you press a button on the control panel, a sound is heard.
•
No
:
No sound is heard.
Units
Show the removal rate settings in one of the following units:
•
Newton -
µ
m
(Metric)
•
Lbf - mils
(Imperial)
Select disc size
Select the disc size diameter:
•
300 mm
•
350 mm
Date
Set the date.
Time
Set the time
Operation mode
See
.
Auto continue mode
You can set the machine to automatically continue to the next step in
a method, as long as the consumables used are the same.
Setting
Definition
Off
The machine pauses between
each step.
Equal cons. except SiC
The machine automatically
continues to the next step, but
pauses when grinding with SiC
Paper, which must be changed
between the steps.
Always
The machine automatically
continues to the next step.
Flushing time after OP
step
20 - 60 seconds
30
AbraPol-30
6 Operating the device
