Struers AbraPol-30, Instruction Manual

Page: 14 / 78

Pcs. Description
1 AbraPol-30 with shift valve/without shift valve
1 Splash guard for manual preparation
1 Inlet hose Diameter: 19 mm/¾", Length: (2 m)
1 Hose for emptying the cooling unit tank
1 Filter gasket
1 Reduction ring with gasket Diameter: ¾" to ½"
2 Hose clamp. Diameter: 40-60 mm
1 Hose for compressed air. Length: 2 m
1 Hose connection for compressed air. Diameter: ¾"
1 Exhaust hose. Diameter: 50 mm. Length: 2.5 m
1 Fork spanner, 24 mm
1 Instruction Manual set
5.3 Power supply
ELECTRICAL HAZARD
The machine must be earthed (grounded).
Make sure that the actual electrical power supply voltage corresponds to the voltage
stated on the type plate of the machine.
Incorrect voltage can damage the electrical circuit.
ELECTRICAL HAZARD
For electrical installations with Residual Current Circuit Breakers
For AbraPol-30 a residual current circuit breaker Type B, 30 mA is required (EN
50178/5.2.11.1).
For electrical installations without Residual Current Circuit Breakers
The equipment must be protected by an insulation transformer (double-wound
transformer).
Contact a qualified electrician to verify the solution.
Always follow local regulations.
Procedure
For specifications see the section Technical data.
14 AbraPol-30
5 Installation