Streamit Lisa Compact User Manual Download Page 67

Page: 67 / 109

Lisa Compact

Message

Description

Erase card failed

Could not start the erase card, e.g., because there
is no card present

Erase card finished

Erase card procedure has completed

Erase playlist finished - <nr> playlists remaining

<nr> represents the number of playlists remaining
on the card after the task completed

Failed to execute <scheduled_task> task - card
usage not allowed

A card-related task cannot be executed on a Lisa
Basic edition, or the Lisa is not yet activated

Failed to play announcement. Announcement info
was lost.

Error with announcement task administration

Format not supported

The audio stream is in WMA format, or the playlist
consists of playlists (nested playlist)

Head task no longer available

Error with scheduler task administration

Head task failed and got lost

Error with scheduler task administration

Invalid activation code: Card usage

Invalid code was sent by activation server, or part
of the activation instructions were lost because of a
bad connection

Invalid activation code: Codec

Invalid code was sent by activation server, or part
of the activation instructions were lost because of a
bad connection

Invalid activation code: EV

Invalid code was sent by activation server, or part
of the activation instructions were lost because of a
bad connection

Invalid activation instructions

Invalid activation instructions were sent by the
activation server or instructions were incomplete
because of a bad connection

Issue encountered, Lisa restarted

The issue could not be resolved, a reboot is
performed

Lisa has no presets and no card

The Lisa cannot play, because it has no presets
and no card. The Lisa will periodically perform a
configuration update in the background, to try and
get presets

Lisa has no presets, playing from card

The Lisa plays from card, because it has no
presets. The Lisa periodically performs a
configuration update in the background, to try and
get presets

Summary of Contents for Lisa Compact














































































































Search results

Summary of Contents for Lisa Compact

Reviews:

Related manuals for Lisa Compact

Brands by name

Popular brands

Streamit Lisa Compact, User Manual

Search results

Summary of Contents for Lisa Compact

Reviews:

Related manuals for Lisa Compact

Brands by name

Popular brands