Stratasys Objet1000 Connex 2, User Manual, Page: 89 / 174

DOC-06800 Rev. A
5–53
Objet1000 - Connex 2 User Guide
4. Click
Build
.
If the build tray file has not been saved, the Save As dialog box opens for
you to save it now.
Objet Studio checks if there is a problem with the positioning of objects
on the tray. If so, the affected objects are displayed with special colors
(see “Tray Validation” on page 47), and a warning message appears.
Figure 5-73: Tray validation warning message
•
To cancel the Build command so you can correct the problem, click
No .
•
To print the models as they are positioned on the tray, click
Yes
.
The Job Manager screen opens, so you can monitor the progress of your
trays—before, during, and after printing. See “Monitoring and
Managing Print Jobs” on page 72.
D R A F T
16 June 2013