Stratasys Objet1000 Connex 2, User Manual, Page: 108 / 174

Using Objet Studio
5–72
DOC-06800 Rev. A
Monitoring and Managing Print Jobs
In the Job Manager screen of Objet Studio, you monitor and manage jobs
sent to the printer. There are a few differences between Objet Studio on
client workstations and on the computer connected directly to the 3D
printer—the server workstation.
•
Objet Studio installed on a client computer only displays the queue and
status for jobs sent to the 3D printer server from that computer, and it
allows the user to edit only these jobs.
Note: If there are several Objet printers on the local network, client
computers can connect to any of them, but only one at a time.
•
Objet Studio installed on the computer directly connected to a specific
3D printer (server), displays the queue and status for all jobs sent to that
3D printer by the server and by all client computers on the network. It
also allows editing and manipulation of all jobs, and enables re sending
previously printed jobs to the printer.
Job Manager
Screen
The Job Manager screen on the client and server workstations looks
identical. The only difference is that options only relevant to the server
workstation are disabled for client installations.
Figure 5-102: Job Manager screen
The Job Manager screen is divided into panels:
•
Jobs Queue
•
Printing Progress
•
History
•
Available Resources
•
Material Consumption
•
Tray Preview
•
Waste
If Objet Studio is not connected to a printer (or printer server), you can
prepare tray files for any Objet printer. Later, these files can be used by
Objet Studio on the appropriate printer server.
Tray Preview
Materials
consumption
Available
resources
Jobs Queue
Print History
Job Manager
Ribbon
Print Progress
Waste status
D R A F T
16 June 2013