Stratasys Objet1000 Connex 2, User Manual, Page: 58 / 174

Using Objet Studio
5–22
DOC-06800 Rev. A
To view the digital materials available for printing objects (using two
basic model materials):
1. Make sure that you have selected the appropriate model materials, and
that
Multiple Materials
is selected.
Figure 5-25: Material selection with two basic model materials
2. Click .
The Material Selection Guide appears, showing the basic model
materials (at the top of the list) and the digital materials available
(combinations of them).
Figure 5-26: Material Selection Guide, showing the digital materials
available with the basic model materials
Assigning a
Model Material
to Objects You can assign any of the available digital materials to objects on the build
tray.
To assign a model material to objects:
1. Select an object on the build tray (see “Selecting Objects” on page 18).
When an object is selected, its properties—including model materials—
are displayed on the Model Toolbar and on the ribbon.
Figure 5-27: Object properties, on ribbon and Model Toolbar
Ribbon
Model Toolbar
D R A F T
16 June 2013