Stratasys Objet1000 Connex 2, User Manual, Page: 141 / 174

DOC-06800 Rev. A
6–21
Objet1000 - Connex 2 User Guide
5. When the following screen appears, open the cover.
Figure 6-18: Head cleaning wizard—steps 5–10
6. Place the mirror on the build tray.
7. Put on the gloves.
8. Soak the cleaning cloth with alcohol.
9. Clean the orifice plates, with a back and forth motion (see figure 6 19).
Use the mirror to make sure that you have removed all of the residue
material.
WARNING: The print head orifice plates (bottom surface) may be hot.
Do not touch them with your bare hands, and proceed with caution.
D R A F T
16 June 2013