Stratasys Objet1000 Connex 2, User Manual, Page: 142 / 174

Operating & Maintaining the Objet1000 - Connex 2 3D Printer
6–22
DOC-06800 Rev. A
Figure 6-19: Cleaning the heads
10. When you have finished cleaning, select the confirmation check box in
the wizard screen (see figure 6 18) and click
Next
.
11. Remove the cleaning materials from the printer and close the cover.
12. Select the confirmation check boxes in the wizard screen and click
Next
.
The head purge cycle begins. When this is complete, the final wizard
screen appears.
Figure 6-20: Head-cleaning wizard—final screen
13. Click Done to close the wizard.
Use this opportunity to clean the entire roller surface, by rotating the roller,
and clean the UV lamps.
D R A F T
16 June 2013