Stratasys Objet1000 Connex 2, User Manual, Page: 113 / 174

DOC-06800 Rev. A
5–77
Objet1000 - Connex 2 User Guide
The following operations are available on the Job Manager ribbon:
Group Icon Purpose
3D
Printer
Client : Sets the server connection. See “Setting the Remote
Printer Connection (Client Mode)” on page 76.
Server : Sets the printer connection. See “Setting the Printer
Connection” on page 74.
Configures options for printer alerts. See “Configuring User
Alerts” on page 79.
Queue Server : Moves a job to the head of the Jobs Queue.
Client : Disabled.
See “Jobs Queue” on page 73.
Server : Moves a job to a higher position in the Jobs Queue .
Client : Disabled.
See “Jobs Queue” on page 73.
Server : Moves a job to the bottom of the Jobs Queue .
Client : Disabled.
See “Jobs Queue” on page 73.
Server : Moves a job to a lower position in the Jobs Queue .
Client : Disabled.
See “Jobs Queue” on page 73.
Job Server :
•
For a job in the
Jobs Queue
—Prints it again (from the
beginning).
•
For a job in the
History
list—Moves it to the
Jobs Queue
for printing.
Client : Disabled.
See “Restarting Jobs” on page 82.
Server : Stops a job in progress.
Client : Disabled.
Server : Continues printing the current job from the point
where printing stopped.
Client : Disabled.
See “Resuming Jobs” on page 82.
Removes the selected job from the queue.
Refreshes the image of the selected job in the Tray Preview
display.
Opens the Tray Settings screen and displays the tray. For
deleted jobs, this enables you to make changes before
printing.
D R A F T
16 June 2013