FP12 Mundo - Installation and Operation Manual
85
Secure the fresh air intake adapter
(A)
on
the fireplace jacket using the 4 screws
provided with the kit.
Then, install the flexible pipe*
(C)
(not
supplied) to the fresh air intake adapter
(A)
using one of the adjustable pipe clamps
(B)
.
Secure the other end of the pipe to the
outside wall termination
(D)
using the
second adjustable pipe clamp
(B)
. The
outside wall termination
(E)
must be
installed outside of the building.
*Use the length required for your
installation while respecting the maximum
length of 30 ft (9 m). To avoid
condensation, it is recommended to use an
insulated pipe long enough and containing a
"P-Trap" loop. This configuration can be
found inside the chase, but must at all times
maintain clearances to combustibles.
