Stove Builder International Valcourt FP12 Mundo Installation And Operation Manual Download Page 2 | Manualshive

Page: 2 / 96

background image

2

FP12 Mundo - Installation and Operation Manual

THANK YOU FOR CHOOSING THIS VALCOURT WOOD FIREPLACE

As one of North America’s largest and most respected wood stove and fireplace manufacturers, Stove
Builder International takes pride in the quality and performance of all its products. We want to help you get
maximum satisfaction as you use this product.

In the pages that follow you will find general advice on wood heating, detailed instructions for safe and
effective installation, and guidance on how to get the best performance from this fireplace as you build and
maintain fires, and maintain your wood heating system.

We recommend that our wood burning hearth products be installed and serviced by professionals who are
certified in the United States by NFI (National Fireplace Institute

®

) or in Canada by WETT (Wood Energy

Technology Transfer) or in Quebec by APC (Association des Professionnels du Chauffage).

Congratulations on making a wise purchase.

If this fireplace is not properly installed, combustible materials near it may overheat. To reduce the risk of
fire, follow the installation instructions in this manual exactly. Contact local building or fire officials about
restrictions and installation inspection requirements in your area.

Please read this entire manual before you install and use your new fireplace. You may need to get a
building permit for the installation of this fireplace and the chimney that it is connected to. Consult your
municipal building department or fire department before installation. We recommend that you also
inform your home insurance company to find out if the installation will affect your policy.

This heating unit is designed to serve as a supplementary heat source. We recommend that a primary
heat source also be available in the home. The manufacturer cannot be responsible for costs associated
with the use of another heating system.

CAUTION:

Do not attempt to modify or alter the construction of the fireplace or its components. Any

modification or alteration of construction may void the warranty, listings and approvals of this system. In
that case, Stove Builder International (SBI) will not be responsible for damages. Install the fireplace only as
described in these instructions.

«
1
2
3
4
...
»

Summary of Contents for Valcourt FP12 Mundo

































































































Reviews:

No comments

Related manuals for Valcourt FP12 Mundo

Brand: J. A. Roby Pages: 4

Brand: Valcourt Pages: 12

Brand: Comfort Glow Pages: 20

attika 600 MAX-1

Brand: RAIS Pages: 26

Brand: Valor Pages: 12

Brand: HAMPTON BAY Pages: 4

DRT4000-C Series

Brand: Superior Fireplaces Pages: 80

Brand: FocalPoint Pages: 5

ChimneyFree 1142880

Brand: Twin-Star International Pages: 50

Brand: Valor Pages: 28

Estate A Series

Brand: Pacific energy Pages: 36

Brand: Napoleon Pages: 4

Brand: Majestic Pages: 44

Brand: Astria Fireplaces Pages: 34

Brand: J. A. Roby Pages: 79

Brand: Superior Pages: 8

CASUAL FIRESIDE 5110-2875O

Brand: OW Lee Pages: 28

CASUAL FIRESIDE 5110-2442O-E

Brand: OW Lee Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands