Still RX70-16, Original Instructions Manual, Page: 43 / 380

Safety
2
Essentials for safe operation
The following factors can lead to a loss of
stability and are therefore prohibited:
• Different tyres on the same axle, e.g.
pneumatic tyres and superelastic tyres
• Tyres not approved by the manufacturer
• Excessive tyre wear
• Tyres of inferior quality
• Changing rim wheel parts
• Combining rim wheel parts from different
manufacturers
The following rules must be observed to
ensure stability:
• Only use tyres with equal and permitted
levels of wear on the same axle
• Only use wheels and tyres of the same type
on the same axle, e.g. only superelastic
tyres
• Only use wheels and tyres approved by the
manufacturer
• Only use high-quality products
Wheels and tyres approved by the manu-
facturer can be found on the spare parts list.
If other wheels or tyres are to be used, au-
thorisation from the manufacturer must be
obtained beforehand.
– Contact the authorised service centre on
this matter.
When changing wheels or tyres, always
ensure that this does not cause the truck to
tilt to one side (e.g. always replace right-
hand and left-hand wheels at the same
time). Changes must only be made following
consultation with the manufacturer.
If the type of tyre used on an axle is changed,
for example from superelastic tyres to pneu-
matic tyres, the load diagram must be changed
accordingly.
– Contact the authorised service centre on
this matter.
174749 EN - 03/2017 31