Still RX70-16, Original Instructions Manual

Page: 305 / 380

Operation
4
Transporting the truck
Type-Modèle-Typ / Serial no.-No. de série-Serien-Nr. / year-année-Baujahr
Rated capacity
Capacité nominale
Nenn-Tragfähigkeit
Battery voltage
Tension batterie
Batteriespannung
Rated drive power
Puissance motr.nom.
Nenn-Antriebsleist.
Unladen mass
Masse à vide
Leergewicht
max
min.*
* see Operating instructions
voir Mode d'emploi
siehe Betriebsanleitung
kg kg
kg
kg
kg kW
V
*
1
2
7321_003-011_V2
Determining the loading weight
– Park the truck securely; see ⇒ Chap-
ter "Parking the truck securely and switch-
ing it off", P. 4-141.
– Determine the unit weights by reading them
off the truck nameplate and, if necessary,
the attachment (variant) nameplate.
– Add the determined unit weights to obtain
the loading weight of the truck:
Tare weight (1)
+ Ballast weight (variant) (2)
+ Attachment net weight (variant)
= Loading weight
.
3
7321_003-012
Hooking on the lifting straps
CAUTION
Harnesses may damage the truck's paintwork!
Harnesses can damage paintwork by chafing
and pressing on the surface of the truck. Hard or
sharp-edged harnesses, such as wires or chains,
can quickly damage the surface.
– Use textile harnesses, e.g. lifting straps, with
edge protectors or similar protective devices if
necessary.
DANGER
There is a risk of being hit if the hoists and harnes-
ses fail and cause the truck to fall. Danger to life!
– Only use hoists and harnesses with adequate
load capacity for the determined loading weight.
– Only use the truck's designated lifting points.
– Make sure that harnesses such as hooks,
shackles, belts etc. are only used in the indicated
load direction.
– The harnesses must not be damaged by truck
parts.
– Loop the lifting straps around the main
traverse (3) on the outer mast of the lift
mast.
174749 EN - 03/2017 293