Still RX70-16, Original Instructions Manual

Page: 253 / 380

Operation
4
Trailer operation
7321_003-066_V2
5
7
6
Uncoupling model RO*245
– Take measures to prevent the trailer from
rolling away, e.g. use wheel chocks.
– Push the hand lever (5) upwards.
– Slowly drive the truck forwards until the tow-
bar eye and towing jaws are disconnected.
– Push the closing lever (7) on the left side of
the tow coupling down as far as it will go.
The tow coupling is closed.
7
8
7321_003-067
Coupling model RO*841
NOTE
Tow coupling RO 841 is intended for a tow-bar
eye in accordance with DIN 74054 (bore
diameter 40 mm).
– Take measures to prevent the trailer from
rolling away, e.g. use wheel chocks.
– Push the hand lever (7) upwards until it
snaps into place.
DANGER
People may be trapped between truck and trailer.
When hooking up, ensure that no one is between
the truck and trailer.
CAUTION
When being coupled, the tow-bar eye must engage
in the middle of the coupling jaw. Failure to follow
these instructions could result in damage to the
coupling jaw or to the tow-bar eye!
– Ensure that the tow-bar eye enters the coupling
jaw centrally.
– Slowly move the truck back.
174749 EN - 03/2017 241