Still RX70-16, Original Instructions Manual

Page: 217 / 380

Operation
4
Attachments
6210_003-035
10 11
14
12
15
17
13
16
– Note the following attachment functions and
pictograms.
10
Move side shift frame or fork for-
wards/backwards
11
Move sideshift to the left/right
12
Adjust fork arms: open/close
13
Swivel lift mast or fork to the left/right
14
Release/clamp load retainer
15
Push off/pull in load
16
Turn to the left/right
17
Tip shovel over/tip shovel back
.
Clamp locking mechanism (variant)
This truck can be fitted with a clamp locking
mechanism as a variant. This prevents the
clamp from opening unintentionally if the
operating function is inadvertently triggered.
DANGER
There is a risk of fatal injury from falling loads if the
correct function of the clamp locking mechanism is
not guaranteed!
If other attachments are used on this truck in addi-
tion to the clamp, make sure that the clamp locking
mechanism function is reassigned to the corre-
sponding operating device every time the clamp is
reassembled; see the chapter entitled "Fitting at-
tachments".
– Make sure that the additional clamp locking
mechanism function is available.
174749 EN - 03/2017 205