Still RX70-16, Original Instructions Manual

Page: 308 / 380

4
Operation
Shutdown
CAUTION
Danger of tyre deformation by continuously loading
on one side!
Have the truck raised and jacked up by the authori-
sed service centre so that all the wheels are clear of
the ground. This prevents permanent deformation
of the tyres.
CAUTION
Danger of damage from corrosion due to conden-
sation on the truck!
Many plastic films and synthetic materials are
watertight. Condensation water on the truck cannot
escape through these covers.
– Do not use plastic film as this encourages the
formation of condensation water.
NOTE
Store only fully charged batteries.
Measures before shutdown
– Store the truck in a dry, clean, frost-free and
well ventilated environment.
– Clean the truck thoroughly; see the chapter
entitled "Cleaning".
– Lift fork carriage to full extent several times.
– Tilt the lift mast forwards and backwards
several times and, if fitted, move attachment
repeatedly.
– To relieve the strain on the load chains,
lower the fork onto a suitable supporting
surface, e.g. a pallet.
– Check the hydraulic oil level and top up if
required.
– Apply oil or grease thinly to all uninsulated
moving parts.
– Lubricate the forklift truck.
– Lubricate the joints and controls.
– Fill the fuel tank.
– Remove the battery and store in a warm and
dry location.
296 174749 EN - 03/2017