Still 0301 Original Instructions Manual Download Page 71

Page: 71 / 192

CAUTION

The values indicated on the label refer to compact

and homogeneous loads and must not be exceeded,

otherwise the stability of the truck and the load-bear-

ing capacity of the structures may be compromised.

The loads refer to centre of gravity distances up to

600 mm.

Notes relating to use of the truck as platform

tractor (4):

●

During transport, the maximum load capaci-

ty on the forks for the truck is 2000 kg Forks

lowered until they are resting on the strad-

dles, and straddles raised using the initial

lift control

Chassis frame labelling

OM2312

The truck's serial number is marked (A) on the

chassis frame.

Overview

Markings

45758043484 EN - 11/2021 - 08

Summary of Contents for 0301

































































































































































































Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands

Still 0301, Original Instructions Manual

Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands