Still 0301 Original Instructions Manual Download Page 60

Page: 60 / 192

Side protection

Description

The side protection has been designed to pro-

tect the operator when the truck is used in ride

on mode.
There are two positions:

–

Position "A" = side protection closed. Posi-

tion used when the operator is using the

truck in pedestrian mode (operated from the

"ground") with the platform closed.

The truck also works with the side protection

closed (Position "A") and also with the opera-

tor on board the truck. In this case the maxi-

mum travel speed of the truck will be automat-

ically limited for safety reasons.

–

Position "B" = side protection open. Position

used with the operator on board the truck,

standing on the platform.

Opening and closing the side protection

–

To open, pull the two operator side protec-

tive guards outwards.

–

To close, push the two operator side protec-

tive guards inwards.

Adjusting the height of the side protec-

tion

–

To adjust the height of the side protective

guards according to the height of the opera-

tor, open the side protective guards, then

manually pull the side protective guards up-

wards (three positions). To close the side

protective guards, push them down until

they reach the original, lowest position.



Overview

Side protection

45758043484 EN - 11/2021 - 08

Summary of Contents for 0301

































































































































































































Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands

Still 0301, Original Instructions Manual

Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands