Still 0301, Original Instructions Manual

Page: 109 / 192

Reversing the direction of travel
Reverse direction without a load on the
forks
●
To reverse direction when travelling without
a load on the forks, turn the drive control
throttle in the opposite direction to the direc-
tion of travel. The truck will stop with ener-
getic but gradual braking and will start to
move again in the opposite direction.
Reverse direction with a load on the
forks
●
To reverse direction with a load on the
forks, put the drive control throttle in the
neutral position and wait for the truck to
stop.
●
Then turn the drive control throttle in the op-
posite direction of travel to the previous
one.
CAUTION
The operator must regulate the travel control by
adapting truck braking to the type of load being car-
ried in order to avoid losing the load.
Truck brake systems
WARNING
The condition of the floor surface considerably af-
fects the braking distance of the truck.
The operator must consider this factor while driving.
While driving, braking can be performed in the
following ways:
●
By turning the travel controls, which allows
two different types of braking
For more gradual deceleration, the operator
can manually reduce the angle of rotation of
the travel controls compared to the neutral
position (service braking).
For more rapid deceleration, the operator
can turn the travel control beyond the neu-
tral position in the opposite direction to the
direction of travel.
●
Braking using the tiller (service braking)
Braking using the travel controls
Description of decelerating and stopping the
truck by manually reducing the angle of rota-
tion of the travel controls compared to the
neutral position (service braking)
●
While holding the tiller head firmly at the
designated points, reduce the angle of rota-
tion (applies to both forward travel and re-
verse travel) of the travel controls compared
to the neutral position. This will gradually re-
duce the travel speed of the truck. The truck
will come to a stop (zero speed) when the
travel control is put in the neutral position
Description of braking achieved by turning
the travel control beyond the neutral position
in the opposite direction to the direction of
travel
●
When driving the truck, turn the travel con-
trol beyond the neutral position in the oppo-
site direction to the truck's direction of trav-
el. The truck will decelerate more forcefully
but will come to a gradual stop. When the
truck stops (zero speed), put the travel con-
trol in the neutral position. Caution: If you
do not put the travel control in the neutral
position, the truck will resume travel in the
opposite direction. For more information,
see also the section
⇒
Chapter "Reversing
the direction of travel", Page 99
Use
4
Using the truck
99 45758043484 EN - 11/2021 - 08