Still 0301 Original Instructions Manual Download Page 45

Page: 45 / 192

–

The message is specific to trucks with the

fork lifting block option or the DLC 1 - 2 op-

tion. The message warns that the maximum

height set for the forks has been reached

("height exceeded warning"). The message

"OK" appears on the display in the red rec-

tangle (E).

–

To delete the message and be able to lift

the forks and the load higher, keep the first

button on the right on the keypad (D) press-

ed for around three seconds.

–

The rectangle (E) on the display turns yel-

low and the word "OK" disappears. The

warning triangle that warns the operator to

pay special attention when moving loads

appears in its place.

–

The message is specific to trucks with the

DLC 3 option or lifting block option. The

message warns that the first maximum

height level set for the forks has been

reached ("first block height exceeded warn-

ing"). The message "OK" will appear on the

display.

–

To delete the message and be able to lift

the forks and the load higher, keep the first

button on the right on the keypad (D) press-

ed for around three seconds.

OM2295

Altezza superata

Avvertimento



OM2294

Altezza superata

Avvertimento



Overview

Instruments and controls

45758043484 EN - 11/2021 - 08

Summary of Contents for 0301

































































































































































































Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands

Still 0301, Original Instructions Manual

Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands