Still 0301, Original Instructions Manual

Page: 70 / 192

Additional designation plate for the double pallet stacker version
(EXV-D)
Description of labels
These labels are present only on the double
pallet stacker version (EXV-D). They provide
information on handling loads with the double
pallet stacker truck version.
DANGER
Read the following information carefully
Strictly adhere to the recommendations and prohibi-
tions.
Notes relating to use of the truck as a pallet
stacker (1) and (2):
●
When raising the forks, the fork lift stops
upon reaching the sensor positioned on the
truck mast To raise the forks further, lower
the straddles all the way to the ground The
fork control will then become active again
●
If there is no load on the straddles, you
must not carry loads on the forks when they
are raised more than approximately
300 mm from the ground
●
The residual capacities are indicated on the
capacity plate
Notes relating to use of the truck as double
pallet stacker (3).
●
When using the double pallet stacker, the
maximum total permitted load capacity of
the truck is 2000 kg This means that the
sum of the load on the straddles and the
load on the forks must not exceed 2000 kg
●
The load on the forks must be less than or
equal to the load on the straddles with a
maximum of 1000 kg
CAUTION
When used as a double pallet stacker, do not allow
the forks to reach the height of the sensor on the
mast.
The sensor will stop the lifting and forces the lower-
ing of the straddles.
CAUTION
When used as a double pallet stacker, do not crush
the load being transported on the straddles by lower-
ing the forks.
There are no automatic safety systems.
Leave a small gap between the top part of the load
on the straddles and the bottom part of the forks.
Overview
3
Markings
60 45758043484 EN - 11/2021 - 08