Still 0301 Original Instructions Manual Download Page 44

Page: 44 / 192

–

Useful information relating to the load trans-

ported on the forks is displayed on the Load

screen for the operator.

–

The optional "Dynamic Load Control" is

available in different versions. All informa-

tion relating to the optional "Dynamic Load

Control" and to that visible on the Load

screen can be found in the relevant section

⇒

Chapter "Dynamic Load Control (DLC) —

Optional", Page 64 .

Error

–

Truck blocking errors or warnings for the

operator are displayed on the Error screen.

–

The message warns that the scheduled

maintenance is due today. The message is

set by the technical service department au-

thorised by the manufacturer according to

the agreements with the customer.

–

The message informs you of when the next

maintenance work is due. The message is

set by the technical service department au-

thorised by the manufacturer according to

the agreements with the customer.

OM2292

Visita di manutenzione

prevista oggi

1/1

ERROR



OM2293

Prossima manutenzione :

100 hrs

1/1

ERROR



Overview

Instruments and controls

45758043484 EN - 11/2021 - 08

Summary of Contents for 0301

































































































































































































Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands

Still 0301, Original Instructions Manual

Search results

Summary of Contents for 0301

Reviews:

Related manuals for 0301

Brands by name

Popular brands