Still 0301, Original Instructions Manual

Page: 18 / 192

Technical service and spare parts
For scheduled maintenance and any repairs to
the forklift, contact only the authorised service
network.
The authorised service network has personnel
trained by the manufacturer, original spare
parts and the tools necessary to carry out
maintenance and repairs.
Servicing by the authorised service network
and the use of original spare parts maintain
the technical characteristics of the forklift over
time.
Only original spare parts provided by the man-
ufacturer may be used for forklift maintenance
and repairs. The use of non-original spare
parts invalidates the warranty and renders the
user responsible for any accidents due to the
inappropriateness of the non-original parts.
Type of use
"Normal use conditions" of the forklift are un-
derstood as:
●
lifting and/or transport of loads using forks
with weight and load centre within the val-
ues provided (see Chapter 6 - Technical
Data).
●
transport and/or lifting on smooth, flat and
compact surfaces;
●
transport and/or lifting of stable loads uni-
formly distributed on the forks;
●
transport and/or lifting with the load centre
approximately on the forklift's median longi-
tudinal plane.
DANGER
The forklift must not be used for other purposes.
Any other use renders the user solely responsible for
injury/damage to persons and/or objects and voids
the warranty.
The following scenarios are examples of incor-
rect use of the forklift truck:
●
Transport on uneven (irregular or non-com-
pact) surfaces
●
loads that exceed the weight and/or load
centre limits;
●
transporting non-stable loads;
●
transporting loads not equally distributed on
the forks;
●
transporting swinging loads;
●
transporting loads whose load centre is
considerably displaced with respect to the
forklift's longitudinal median plane;
●
transporting loads of dimensions such as to
block the view of the operator when driving;
●
transporting loads piled so high that they
could fall onto the operator;
●
travelling with a load over 300 mm off the
ground;
●
transporting and/or lifting people;
●
Pushing loads
●
moving upwards or downwards on a slope
with the load facing downwards;
●
turning at high speed;
●
turning and/or moving sideways on slopes
(upwards or downwards);
●
colliding with stationary and/or mobile struc-
tures;
DANGER
Improper use of the forklift could cause it and/or at
the load to overturn.
Introduction
1
Technical service and spare parts
8 45758043484 EN - 11/2021 - 08