Stihl ASA 85, Instruction Manual

Page: 23 / 224

0458-285-9721-C
21
English 18 Maintenance
► Cleaning and cutting and anvil blades with a damp cloth
and warm soapy water.
► Spray both sides of cutting and anvil blades with STIHL
Multispray.
17.3 Cleaning the Carrying System
► Remove the holster (12) and bag (8).
► Take the controller (7) off the waist belt.
► Pass the controller (7) and cable through the carrying
system.
► Disconnect the plug (5).
► Open the hook and loop fasteners (4, 6 and 10).
► Take the connecting cable (1) out of the carrying system.
► Remove the control unit (3).
► Open the hook and loop fastener (11).
► Remove the battery bag (9).
► Clean the carrying system with a damp cloth.
► If the carrying system is very dirty: Hand wash the carrying
system with a color detergent or a mild washing agent.
► Fit the battery bag (9).
► Thread the hook and loop fastener (11) through the loop
and close it.
► Thread the connecting cable (1) through the belt (2).
► Fit the control unit (3).
► Fit the connecting cable (1).
► Pass the controller (7) and cable through the carrying
system.
► Attach the controller (7) to the waist belt.
► Close the hook and loop fastener (6).
► Thread the hook and loop fastener (4) through the loop
and close it.
► Thread the hook and loop fastener (10) through the loop
and close it.
► Insert the plug (5).
► Fit the holster (12) and bag (8).
17.4 Cleaning the Battery
► Clean the battery with a damp cloth.
18.1 Maintenance Intervals
The maintenance intervals are dependent on the
environmental and operating conditions. STIHL
recommends the following maintenance intervals:
Every 400,000 cuts
► Have pruning shears serviced by a STIHL servicing
dealer.
Daily
► Sharpen the cutting blade.
11
7
3
1
5
12
6
4
2
10
0000-GXX-4488-A3
18 Maintenance