Stihl ASA 85, Instruction Manual

Page: 17 / 224

0458-285-9721-C
15
English 10 Removing and Fitting the Battery
► Attach the controller (1) to the waist belt (2).
10.1 Fitting the Battery
► Open the zipper on the carrying system.
► Push the battery (1) into the battery bag (2) as far as stop.
► Close the hook and loop fastener (3).
The battery (1) cannot move.
► Thread the hook and loop fastener (4) through the loop
and close it.
The battery bag (2) is attached to the carrying system.
► Close the zipper on the carrying system.
10.2 Removing the Battery
► Stand the carrying system on a level surface.
► Open the zipper on the carrying system.
► Open the hook and loop fastener (1) and pull it out of the
loop.
► Open the hook and loop fastener (2).
► Remove the battery (3).
11.1 Switching On the Pruning Shears
► Hold the pruning shears firmly with one hand on the
control handle - wrap your thumb around the handle.
► Move the on/off switch (3) to ‘ON’.
You will hear 1 long beep and 3 short beeps. The pruning
shears are ready for operation.
► Depress the trigger (2).
The cutting blade (1) opens fully.
10 Removing and Fitting the Battery
4
0000-GXX-4084-A1
3
11 Switching On the Pruning Shears
3
0000-GXX-4085-A1
1
2
3
2
1
0000-GXX-4086-A0