Stihl ASA 85, Instruction Manual

Page: 28 / 224

0458-285-9721-C
26
English 19 Repairing
► If an ASA85/B blade assembly is fitted: Remove the
spacer (2).
► Take out the screw (5) and remove the locking
segment (4).
► Unscrew the adjusting nut (7).
► Remove the cutting blade (6) together with grease nipple
(5) and dispose of the cutting blade (6).
► If the anvil blade (8) is smeared with grease: Clean the
anvil blade (8).
► Lubricate bearing point of new cutting blade (6) and the
grease nipple (5) with STIHL multipurpose grease.
► Fit grease nipple (5) in the new cutting blade (6).
► Fit new cutting blade (6) on the anvil blade (8).
► Fit adjusting nut (7) on thread of grease nipple (5).
► Open the cutting blade (6).
► Engage the locking segment (3) on the adjusting nut (7),
insert the screw (4) and tighten it down to a torque of 7
Nm.
► Lubricate bores for pivot pin (1) with STIHL multipurpose
grease.
► If an ASA85/B blade assembly is fitted: Fit the spacer (2).
► Fit the pivot pin (1).
► Fit a new E-clip (3).
► Lubricate cutting and anvil blades with grease gun.
► Adjust play between cutting and anvil blades.
5
6
7
8
0000-GXX-4104-A1
7
5
8
6
6
8 3 4
0000-GXX-4105-A1
1
2
3
0000-GXX-7630-A0