Stihl ASA 85, Instruction Manual

Page: 21 / 224

0458-285-9721-C
19
English 14 After Finishing Work
13.4 Cutting
► Position the anvil blade (2) against the underside of the
branch.
WARNING
The moving cutting blade can seriously injure the user.
► Keep your free hand at least 40 cm away from the cutting
blade.
► Never touch the cutting blade.
► Depress the trigger (3).
The cutting blade (1) closes and the branch is cut.
The cutting blade can jam during cutting work.
NOTICE
The pruning shears can be damaged if they are switched off
while the cutting blade is jammed.
► Do not switch off the pruning shears.
► Do not swing the pruning shears sideways or upwards.
► If the cutting blade is jammed: Swing the pruning shears
downwards and pull them out of the cut.
The cutting blade (1) opens.
14.1 After Finishing Work
► Switch off the pruning shears, pull out the connecting
cable plug and remove the battery.
► If the pruning shears are wet: Allow the pruning shears to
dry.
► If the battery is wet: Allow the battery to dry.
► Clean the pruning shears.
► Clean the cutting and anvil blades.
► Clean the battery.
15.1 Transporting the Pruning Shears and Carrying
System
► Switch off the pruning shears and pull out the connecting
cable plug.
► Put the pruning shears in the holster.
2
1
3
0000-GXX-4101-A0
0000-GXX-4095-A0
14 After Finishing Work
15 Transporting