72
15 User code
In the
User code
menu, a user code can be entered.
each number of the 4-digit code must be individu-
ally adjusted and confirmed. after the last digit has
been confirmed, the menu automatically jumps to
the superior menu level.
to access the menu areas of the expert level, the ex-
pert user code must be entered:
expert user code:
0262
For safety reasons, the user code should generally
be set to the customer code before the controller is
handed to the customer!
Customer user code: 0000
16 In- / Outputs
In the
In- / Outputs
menu, external modules can be
registered, sensor offsets can be adjusted and relay
outputs can be configured.
16.1 Modules
In this menu, up to 5 external modules can be regis-
tered.
all modules connected and acknowledged by the
controller are available.
Î
to register a module, select the corresponding
menu item by pressing button
5
the checkbox indicates the selection. If a module is
registered, all its sensor inputs and relay outputs will
be available in the corresponding controller menus.
adjustment channel Description
adjustment range / selection Factory setting
module 1 ... 5
registering external modules -
-
In- / Outputs / Modules
295931-36390-8667 SOM 8 plus_en.indb 72
20.10.2011 13:14:58