48
When a function is selected, a submenu opens in
which all adjustments required can be made.
With this submenu, a relay and, if necessary, certain
system components can be allocated to the func-
tion.
the menu item
Relay selec.
is available in all opti-
onal functions. therefore, it will not be explained in
the individual function descriptions.
With this menu item, a relay can be allocated to the
function. all free relays are available for selection.
In the submenu
Controller
, all free relays of the con-
troller are displayed. If external modules are connec-
ted and registered, their relays will be displayed in
corresponding submenus.
When a function has been selected and adjusted, it
will appear in the
Opt. functions
above the menu
item
Add new function...
.
this allows an easy overview of functions already ac-
tivated.
an overview about which sensor has been allocated to
which component and which relay has been allocated
to which function is given in the
Status / Service
menu.
at the end of each optional function submenu, the
menu items
Funct.
and
Delete function
are availa-
ble.
With the menu item
Funct.
, an optional function
already selected can be temporarily deactivated or
re-activated respectively. all adjustments remain
stored, the allocated relays remain occupied and
cannot be allocated to another function.
If the menu item
Delete function
is confirmed by
pressing button
5
, a security enquiry appears.
the setting can be changed between
Yes
and
No
by pressing buttons
and
4
. If
Yes
has been
selected and confirmed by pressing button
5
, the function is deleted and available under
Add
new function...
again. the corresponding relays are
available again.
Parallel relay
Note:
If a relay is in the manual mode, the selec-
ted parallel relay will not be energised.
295931-36390-8667 SOM 8 plus_en.indb 48
20.10.2011 13:14:44