15
Assembly roof-tile clamps
with lead
Place the first mounting tab so that the lower tile is covered.
Additionally make sure that the mounting tab is put sideways under
the adjacent tiles (bend up mounting tabs sidewise).
Mount the roof-tile clamps without covering the lower tile.
The roof-tile clamp must not cover the lower tile. Otherwise, a
pressure point on the lower tile may arise.
Mount the upper mounting tab. Bend it up sidewise. The screws of
the roof-tile clamp must be covered.
Protect the mounting tab against slipping.
The added foam wedge is placed under the adjacent tiles on both
sides as well as above (protection against splash water and snow).
Completely mounted roof-tile clamp.
Further roof-tile clamps in one row must be adjusted exactly (e.g. by
a line mark)
Summary of Contents for FKA 240 Series
Page 1: ...1 Assembly Instructions Solar collectors FKA 240 270 Roof mounted installation...
Page 36: ...36 Initial operation 0 1 2 3 4 2 5 3 6 7 8 9 6 1 0 3 1 6 2 3 6 6 5 5...
Page 37: ...37 Initial operation Schematic drawing of the system construction and piping scheme...
Page 38: ...38 Initial operation Notes...
