background image

 

 
 
 

 

Package Contents 

Package contents of XTOP are below. Before using XTOP, please make sure that all of components 
are in the package. 

 

* Protection sheet is option content in XTOP04TW.

 

◆  XTOP Series Model Description 

XTOP          08                    T                              V              -            E                      D            -            E 

 

Series      Display Size      LCD type                  Resolution              S : S type          A : AC power      E : Ethernet 

                    04 : 4.3”      T : TFT Color LCD      Q : QVGA(320*240)        E : E type      D : DC power        + CF Card 

                    05 : 5.7”      S : STN Color LCD      V : VGA(640*480)          U : U type 

                    08 : 8.4”      M : STN Mono LCD    S : SVGA(800*600)         

                    10 : 10.4”                                            X : XGA(1024*768) 

                    12 : 12.1”                                            W: WQVGA(480*272) 

                    15 : 15”

                                       

WVGA(800*480)

 

Safety Precautions 

Products  to  safely  and  efficiently  use  it,  please  read  through  the  contents  of  this  manuals. 
Precautions for the safety of using the products safely and properly will prevent accidents and risk 
in advance, so please just do it. 

Precautions on Disposal                                                                                                                     

When  you  dispose  of  product  and  battery,  please  treat  it  as  industrial  wastes.  It  can  create 
poisonous substances or explosion. 
 

XTOP SERIES Installation Manual 

XTOP04/07 Only 

Summary of Contents for XTOP Series
















Reviews: