Project Checklist
Kit Contents
☐
Laser cut wood (19 Sheets - See inventory on following pages)
☐
Illustrated instruction manual
☐
Rolled computer drawn plan set
☐
Vinyl windscreen decal
☐
1 - Pre-bent landing gear (1/8 in. dia.)
☐
2 - 1/4 in. square x 24 in. length balsa stock (Leading Edge)
☐
4 - 1/8 in. x 1/4 in. x 24 in. length balsa stock (Spar Cap)
☐
12 - 1/8 in. x 3/16 in. x 24 in. length balsa stock (Sub Spar and Turbulators)
☐
Du-Bro RC 30 in. Micro2 Pushrod System [DUB922]
Taped to back of wood brick:
☐
2 - 0.045 in. x 12 in. music wire
☐
4 - 24 in. lengths of carbon fiber bar stock.
☐
Large Hardware Bag (4 x 6 in.)
1 - Package rubber bands #33
1 - Laser cut basswood elevator joiner
2 - 2-1/4 in. Foam Wheels (pair)
2 - Du-Bro RC EZ Connector [1 pkg. DUB845]
2 - Du-Bro RC Micro2 EZ-Link [1/2 pkg. DUB920]
4 - Du-Bro RC Micro2 Control Horns [2 pkg. DUB919]
3 - 3/16 in. x 4-1/2 in. hardwood dowel (user will cut to final length)
☐
Small Hardware Bag (2 x 3 in.)
1 - 1 in. length of fuel tubing (EZ link retainer)
2 - Wheel retention washers (press on wheel collar)
2 - 3/16 in. Neo. Magnet
2 - 4-40 x 3/8 in. nylon machine screw
4 - 4-40 x 3/8 in. Machine Screw (steel for motor mount)
6 - 4-40 blind nuts
Required Electronics (Available at StevensAero.com)
☐
4-6 Channel radio and micro receiver. We suggest the Spektrum DX6i and AR500 receiver.
☐
4 - Hitec HS-65HB two each 9 in. servo extensions.
☐
Hacker A30-28S Brushless Motor w/10x5 APC E propeller.
☐
Castle Creations 25A brushless ESC
☐
1 pkg. 3.5mm gold bullet connectors [EFLA241]
☐
11.1V 1600-2100mAh LiPo capable of 30A continuous
© 2009 Stevens AeroModel all rights reserved.
Page 3 of 30
Required Building Supplies and Tools
☐
1 oz. Medium CA Glue
☐
1/2 oz. Thick CA Glue
☐
1/2 oz. Thin CA Glue
☐
CA glue accelerator (kicker)
☐
Balsa filler
☐
Hobby Knife with ample supply of #11 blades
☐
Sanding block with 400 and 600 grit paper
☐
Heat Gun and Covering Iron
☐
Small Needle Nose Pliers
☐
1 in. x 12 in. length sticky back velcro
☐
3/4 in. wide clear tape
Optional Building Supplies and Tools
☐
CA glue de-bonder
☐
Long sanding bar
☐
Masking Tape (Low tack painters tape)
☐
Soldering Iron
