Sand Completed Fuselage
☐
Completed fuselage assembly is now ready
for sanding. Use small amounts of balsa
colored wood filler to fill any imperfections
and gaps.
☐
With battery hatch installed, lightly sand entire
fuselage assembly with 400 grit sanding block
in preparation for covering.
Assemble Tail Feathers
☐
Assemble vertical stabilizer, rudder, horizontal
stabilizer, and elevator halves. Using the plan
set as a guide assemble each component
beginning with the outer framework and
finishing with the internal truss. Bond with
thin CA glue.
Vertical Stabilizer and Rudder
Horizontal Stabilizer
Elevator (Make Two)
© 2009 Stevens AeroModel all rights reserved.
Page 16 of 30
