Fuselage Hatch Assembly
☐
Assemble H1 from parts H1a/H1b/H1c and
bond using thin CA glue along dove-tail joints.
☐
Dry fit H1d doublers to right and left side of
H1 hatch assembly. The tabs in H1d should
extend proud of underside of H1d by 1/16 in.
☐
Using thick CA glue, bond H1 on top of H2
using tabs from H1d to locate H1 atop H2.
☐
Glue one 3/16 in. diameter magnet within
locating hole in H1.
☐
Dry fit H3 to notches in former F3.
☐
Fit H4 to former F3 on top of H3 square to
former then bond using thin CA glue.
© 2009 Stevens AeroModel all rights reserved.
Page 13 of 30
