Service and troubleshooting
Operating instructions (Version 0)
63
ST 1075
7
7.5.3 Fault messages
If there is a fault, the radio network will be cancelled and a red light (FAULT) will be
continuously illuminated on the front panel. On the screen, it looks like this:
Before the system can be restarted (see
5.2.2 "Starting and identification" on
), the fault must be cancelled.
Figure 7.7
Fault message
Table 7.4
Fault messages
Code
Screen text
Possible cause
Solution
71
No
communication
with the master
column.
Distance between
the columns too
great; time interval
between messages
too great.
Reboot the system. If the fault
occurs again, contact
technical services.
72
No
communication
with a slave
column.
Distance between
the columns too
great; time interval
between messages
too great.
Reboot the system. If the fault
occurs again, contact
technical services.
77
Front key.
A push button was
being pressed during
startup.
Reboot.
FAILURE 71
No communication with
the master column
Summary of Contents for ST1075-FBF
Page 21: ...Safety Operating instructions Version 0 21 ST 1075 2 Figure 2 2 Safety and warning labels ...
Page 78: ...Operating instructions Version 0 78 ST 1075 A 2 Hydraulic unit Figure A 2 Hydraulic unit ...
Page 90: ...Operating instructions Version 0 90 ST 1075 A 9 Label locations Figure A 9 Label locations ...
