stertil-KONI ST1075-FBF, Installation, Operation And Maintanance Instructions

Page: 15 / 102

Safety
Operating instructions (Version 0) 15 ST 1075
2
The buyer/user is obliged to familiarize operating, cleaning and maintenance
personnel with these instructions.
Upon their arrival, check deliveries for:
• Any damage and/or missing parts due to transport. Make sure that the carrier
draws up a transport damage report on the spot.
• Correctness and completeness; have all parts (additionally) and or accessories
ordered been supplied?
In the event of damage always contact Stertil B.V. or the supplier.
All worn or broken parts need to be replaced with genuine lift manufacturer
supplied parts.
IMPORTANT SAFETY INSTRUCTIONS
• Read all instructions.
• If an extension cord is necessary, use a cord with
a current rating equal to or more than the
equipment. Cords rated for less current than the
equipment may overheat. Take care to arrange the
cord so that it will not be tripped over or pulled.
• Always unplug equipment from electrical outlet
when not in use. Never use the cord to pull the
plug from the outlet. Grasp plug and pull to
disconnect.
• Let equipment cool completely before putting
away. Loop cord loosely around equipment when
storing.
• To reduce the risk of fire, do not operate
equipment in the vicinity of open containers of
flammable liquids (gasoline).
• Provide adequate ventilation when working on
internal combustion engines.