Specifications
Operating instructions (Version 0)
25
ST 1075
3
3.6
Column, lifting cylinder and guide block
The column and lifting cylinder together form the most important part of the mobile
column lift. A guide block with rollers is located within the U-shaped profile of the
column. The rollers enable the guide block to move up and down the entire length of
the column. The lifting force is supplied by the hydraulic lifting cylinder.
3.7
Control box
The control panel on the front of the control box has all functions necessary to control
the operation of the column lift. An emergency stop switch is also located on the
control panel. The components of the control panel and their functions are described
in chapter
.
3.8
Pallet lifting mechanism
The pallet lifting mechanism is fitted with two wheels, and is used for relocating the
column lift. Mounted at the rear, these safeguard the column lift against toppling over
when it is being relocated. When relocating the column lift, the pallet lifting
mechanism raises the rear of the column off the floor so that it can be moved more
easily.
3.9
Locking feature
If the hydraulic pressure fails while a vehicle is being raised, lowered or standing still
above the first safety lock on the lifting system, a mechanical safeguard will ensure
that the vehicle cannot fall.
The characteristic clicking sound indicates that the locking pawl is active. When
lowering, the pawl is retracted by a solenoid.
Summary of Contents for ST1075-FBF
Page 21: ...Safety Operating instructions Version 0 21 ST 1075 2 Figure 2 2 Safety and warning labels ...
Page 78: ...Operating instructions Version 0 78 ST 1075 A 2 Hydraulic unit Figure A 2 Hydraulic unit ...
Page 90: ...Operating instructions Version 0 90 ST 1075 A 9 Label locations Figure A 9 Label locations ...
