“Local”:
Local rights are for local operation, such as the operation using front panel, IR remote control and RS-485 interface.
PTZ control: manually control PTZ cameras
Record: Manual start/stop recording.
Set parameters Setup: Locally setup the DVR parameters;
Log: Locally view DVR’s log
Utilities: Locally upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
“Remote”:
PTZ Control: Remote control PTZ;
Record: Remote manual start/stop recording;
Set parameters Setup: Remote setup the DVR parameters;
Log: Remote view the log on DVR;
Utilities: Remote upgrade firmware, format HDD, reboot DVR and shut down DVR, etc.
Talk: Client talks with DVR;
Alarm: Remote control DVR alarm output;
Local Video Out: Remote control DVR video output;
Com Control: DVR RS-232
This MAC address is not the one of the DVR but the address of the PC that accesses the it. If you setup this function, only
the PC with this MAC address can access the DVR.
You can use “ipconfig” in the DOS prompt at the PC to obtain the MAC address.
In the “User Management” interface, you can use the [↑] [↓]
keys to select one user, then use
[→]
to move the “Active
Frame” to the “Del” button, press [ENTER], in the pop-up confirmation dialog, press the “Confirm” button to delete the
selected user and return. Press “Cancel” or [ESC] to abort deleting.
Unit Name and Device ID
Unit name
Enter “Utilities” [→] “System Info” [→] “Unit Name”
User rights description
MAC address
Delete user
Summary of Contents for CCTV-965
Page 1: ......
Page 31: ......
Page 36: ...6 O V IN V OUT VGA A OUT V IN ETHERNET POWER USB MONITOR MODEM 2WIRE CAMERA AC POWER ADAPTER ...
Page 61: ......