Stephill SSDP120 Handbook Download Page 23

 

 

Issue 1                                                                                                                       

21 

• Running on light load should be avoided or reduced to a minimum period. If weekly exercising on no load is 

carried out, the running period should be kept down to maximum 15 minutes or until the battery charge rate 
returns to normal. 

• Every year the e

ngine / generating set should be run on full load for four (4) hours, to burn off accumulations 

of carbon in the engine and exhaust system. This may require a “dummy” load. The load should be built

-up 

gradually from zero over the four hour run. 
Operating this generator at light loads for long periods can result in carbon build up in the engine, which could 
cause overheating, poor efficiency and excessive smoking. High levels of carbon in the exhaust outlet and 
reduced diameter of tail pipe will be an indicator of this, please call Perkins for further information. 

 
11.3 Alternator service 

Brushless alternators employed on Stephill Generators are maintenance free.  Service must be carried out by 
competent qualified personnel strictly in accordance with the instructions given in the handbook.  Any spare 

parts required should be of genuine manufacturer’s origin.

 

http://www.meccalte.com/

 

 
12 WARRANTY 

All equipment supplied by STEPHILL GENERATORS LTD carries a warranty  
of 12 months from date of despatch. 

 

During the warranty period, should the plant fail due to faulty design, materials or workmanship by STEPHILL 
GENERATORS LTD or its sub-contractors, we undertake to rectify the fault. 
STEPHILL GENERATORS LTD will accept no responsibility whatsoever for equipment that has failed due to; 
- Operation with incorrect fuel, lubricating oil or coolant. 
- Improper repair or use of parts not supplied by STEPHILL GENERATORS LTD. 
- Lack of, or incorrect maintenance. 
- Fair wear and tear, misuse, negligence, accidental damage, improper  
  storage, incorrect starting / warm-up / run-in or shutdown. 

 

No warranty claim will be considered by STEPHILL GENERATORS LTD unless any defective parts are 
available for inspection by us, or our nominees, to determine the reason or cause of failure, and STEPHILL 
GENERATORS LTD is given the option of repair or replacement. 

 

STEPHILL GENERATORS LTD are not responsible for incidental or consequential damages, downtime, or 
other costs due to warrantable failure, and unauthorised alterations made to any product supplied by 
STEPHILL GENERATORS LTD. 
 

Summary of Contents for SSDP120




























Reviews: