49
AlphaCom XE - Installation, Configuration & Operation
A100K10805
The ASVP board has the same set of standard messages as the ASVP
Software Module.
No configuration is required when the ASVP board is used. Insert
the board in any free board position in the AlphaCom server and the
messaging services will be automatically activated when the system is
powered up.
The ASVP board does not require any license.
L
Customized Message Upload
9.2
The ASVP software module provides the AlphaCom XE server with a set
of default messages such as absence, alarm, and general information
messages.
It is possible to modify or add new messages to the system by uploading
audio files to the AlphaCom XE server using AlphaWeb.
If the ASVP Software Module is present, a web loaded message
-
will mask the corresponding ASVP message.
Deleting the web loaded message will unmask the ASVP message.
-
An Easy Message is one single WAV file for each Message Group +
Group Index.
Web loaded messages are uploaded individually via AlphaWeb
●
Station-recorded messages are recorded from a station
●
The audio file can be recorded on a PC or in a professional studio if high
quality playback is required. The audio file must be in WAV format.
The following codecs are supported:
PCM files at 16kHz sample rate (linear 16bit), mono (1 channel)
●
MS ADPCM at 16kHz sample rate, mono (1 channel)
●
IMA ADPCM at 16kHz sample rate, mono (1 channel)
●
When a request is made to AlphaCom XE to play a message, it will
search for matching group/index in the following order:
1. Station-recorded message
2. Web loaded message
3. Message in the ASVP Software Module on the AMC-IP board
4. Message on the ASVP board (if present)
Upload messages from AlphaWeb
9.2.1
When uploading a WAV file, the file must be associated with the relevant
intercom feature by means of two parameters:
Message Group
and
Group Index
.
In the tables below, you can find the link between the intercom feature
and the Message Group and Group Index for the message you intend to
customize.
Log on to AlphaWeb
●
Select
●
System Configuration
>
Messaging
An Audio Messaging license must have been installed up front to
-
be able to access this page.
Go to the
●
Upload Wav File
section at the bottom of the page, and
select
Message Group
and
Group Index
according to the tables
below.
Browse to the WAV file, and select
●
Upload
.
Available
language packages:
da Danish
de German
en English
fi Finnish
fr French
it Italian
ko Korean
no Norwegian
sv Swedish
chn Chinese
