32
A100K10805
AlphaCom XE - Installation, Configuration & Operation
Station Configuration
5
Configuration in AlphaPro
5.1
Configuration of stations and users are undertaken in the
Users &
Stations
section of AlphaPro.
Configuration of stations are done by filling in the fields under
Users &
Stations
.
The main fields for a normal configuration are:
Physical Number
-
Directory Number
-
Display Text
-
Station Type
-
Visibility
-
To configure stations, click the
Users & Stations
icon.
All stations are identified by the exchange with its physical number.
The physical number for a star-wired station is the number of the
physical wire connection point on the ASLT or ATLB card.
IP stations must also be given physical numbers to follow the same
logic. This number can be any number below 552, but must not overlap
star-wired station physical numbers.
L
Start numbering the IP stations from 552 and downwards to avoid occupied
number problems if the exchange is extended with more star-wired stations
later on.
Directory Number
●
is the number to dial to reach the station.
The default number can be changed to any 2-8 digit number
-
starting with 1, 2, 3, 4 or 5. Numbers with first digit 6-9 are reserved
for functions. If these numbers should be used, the corresponding
function code must be changed. (See section 2.5.1.)
Display Text
●
is the station ID text shown in the called station’s
display.
1, 2, 3, 4, 5, ...... 550, 551, 552
Physical numbers
Star wired stations
IP stations