Stentofon alphaCom XE Installation, Configuration & Operation Download Page 2

Page: 2 / 68

A100K10805

AlphaCom XE - Installation, Configuration & Operation

Zenitel Norway AS and its subsidiaries assume no responsibility for any errors that may appear in this

publication, or for damages arising from the information therein. No information in this publication should be

regarded as a warranty made by Zenitel Norway AS.
The information in this publication may be revised or changed without notice. Product names mentioned in

this publication may be trademarks and are used only for identification.

Zenitel Norway AS ©

2010

About this Document

Document Scope

This document provides a detailed step-by-step guide to the installation

and configuration, as well as useful information on system management

and operation, of the AlphaCom XE Audio Server product range.
This document should provide adequate information for setting up the

system and getting it up and running.

Product Information

Product

Part Number

AlphaCom XE1 Audio Server

1009601002

AlphaCom XE7 Audio Server

1009608000/1009608100/1009608106/1009608300

AlphaCom XE20 Audio Server

1009621000

AlphaCom XE26 Audio Server

1009627000/1009627001/1009627002

Publication Log

Rev.

Date

Author

Comments

1.0

21.10.2010

HKL

Published

1.1

24.11.2010

HKL

Revised LCM figures

1.2

4.3.2011

HKL

XE7 backplane fig.

1.3

18.3.2011

HKL

AMC board jumpers

Related Documentation

For further information, refer to the following documentation:

Doc. no.

Documentation

A100K10176

RIO Remote Input/Output Unit

A100K10300

Prison Technical Manual

A100K10390

SIP GSM Gateway MV-370

A100K10333

SIP Analog Gateway AudioCodes MP-114/118

A100K10313

Network Design Guide

A100K10590

Billing System Configuration Guide

A100K10610

LCM - Line Connection Module

A100K10652

IP DECT Installation & Configuration

A100K10674

API STENTOFON SDK

A100K10777

IP DECT Quick Configuration

A100K10788

IP Master Station Installation & Configuration

A100K10803

IP Substation Installation & Configuration

A100K10845

SoftClient Installation & Operation

Summary of Contents for alphaCom XE





































































Search results

Summary of Contents for alphaCom XE

Reviews:

Related manuals for alphaCom XE

Brands by name

Popular brands

Stentofon alphaCom XE, Installation, Configuration & Operation

Search results

Summary of Contents for alphaCom XE

Reviews:

Related manuals for alphaCom XE

Brands by name

Popular brands