Steinmeyer FMC200, Operating Manual

Page: 126 / 128

12 FAQ Steinmeyer Mechatronik
E-60
Operating manual FMC200 controller
What is the resolution of the connected measuring system?
• Information about the resolution of the measuring system are given in the assem-
bly manual of the positioning system.
Why does the positioning system oscillate when connected?
•
The control parameters may have to be adjusted due to the screwed connection,
ground surface or various load conditions. The control parameters can be adjusted
using the commissioning software EasyMotionStudio.
How can the safety devices (overcurrent, drag error, etc.) be configured?
• Safety devices can be customized using the commissioning software EasyMotion-
Studio (Drive Setup).
How to change the axis ID of the respective axis?
•
The axis ID can be changed using the commissioning software EasyMotionStudio.
For this purpose, the supplied project file has to be opened and the corresponding
parameters have to be changed in the DriveSetup.
How can a safety concept be implemented with the controller?
• The controller has a separate motor supply, which provides power to the output
stages. This can be switched off separately using a safety relay.
Controller versions having a certified Safe Torque Off input (STO input) are avail-
able upon request from Steinmeyer Mechatronik.