Rail Runner LT
Rail Runner LT
– Operator’s Manual
29
5.8.4. Narrow magnetic unit
Allows
clamping
a
semi-flexible
track
or
rigid
track
to
ferromagnetic surfaces.
The
holding
force
on
a
5
mm
(0.2
″)
thick
surface
is
750
N up
to
a
temperature
of
100°C
(212°F). At 180°C (356°F) the force decreases to 450 N.
Attach the unit to a semi-flexible rail as shown in the left figure. Use the 4 mm
hex wrench and M6x16 cylinder-head screws to tighten the bracket to the unit. Then,
use the 4 mm hex wrench and M6x16 button-head screws to tighten the bracket to
the rail.
Attach the unit to a rigid rail as shown in the right figure. Use the 4 mm hex
wrench and M6x35 screws.
To clamp the unit to the surface, use the 17 mm flat wrench (not included) and set
the side screw to ON.
Part number:
PDS-0582-10-00-02-0
Part number
(bracket for semi-flexible track):
DYS-0582-10-00-00-0
