Rail Runner LT
Rail Runner LT
– Operator’s Manual
41
5.18. Cutting torch holders
5.18.1. Standard torch holder
Designed for torches with the diameter of
28
–35
mm
(1.10
–1.38″). Allows rough
adjustment of the torch angle.
5.18.2. Precise torch holder
Designed for torches
with
the
diameter
of
28
–35 mm
(1.10
–1.38″). Allows
precise
adjustment
of
the
torch
angle.
Use the knob to adjust the vertical position. Install the knob at any side by using
the 2.5 mm hex wrench and the set screw.
To
adjust
the
resistance
of
the
vertical
move,
use
the
2.5
mm
hex
wrench
to
unscrew
the fixing screws. Then, use
the 2 mm hex wrench to rotate the adjusting screws.
Part number:
UCW-0475-28-00-00-0
Set screw
Adjusting screws
Fixing
screws
Part number:
UCW-0475-08-00-00-0
