52
RoomWizard
| SYSTEM MANAGER MANUAL
53
LOTUS DOMINO |
RoomWizard
STEP 5:
CONFIGURE OTHER OPTIONS
You can now configure the remaining options for each RoomWizard
or group of RoomWizards.
ROOMWIZARD SETTINGS
The additional options found under Setup > Device are described
below. These options allow you to adjust setting for one specific
RoomWizard or all RoomWizards in a group.
Creating RoomWizard groups can dramatically reduce the time
needed to implement create or change room settings. See “Step 2:
Set Up Groups of RoomWizards” on page 23.
Device > Network > Proxy
enables you to enter a proxy server that
receives a request from an internet service. If your firewall blocks access
to the FTP site for firmware upgrades, enter your proxy server here.
Device > Language
enables you to restore the RoomWizard to the
default factory settings. You also choose the language for the touch
screen display here.
Device > Date/Time enables
you to set the date and time and
choose a 12- or 24-hour time format. (RoomWizards show only local
time). Select your time zone from the drop-down list. The time zone
is used for email delivery. RoomWizard can automatically adjust its
clock for daylight savings time and synchronize its clock with the
NTP server. When the date or time is changed, the RoomWizard
automatically reboots.
NOTE
In synchronized mode installations, RoomWizard must get the time
from the server.
Additional Help
Resources
Please call technical support for assistance or to arrange for web-
based delivery and installation of the synchronization software. See
Technical Support on page 113.
Connector Test XML is available for troubleshooting synchronization
software. If an error occurs during testing, select “view source” from
the file menu. Contact technical support if the error is not clear. See
Technical Support on page 113.
Technical notes
More information is available from the IBM Lotus site http://www-
306.ibm.com/software/lotus/
The “Extract calendar details” option in the Domino Configuration
document is available after selecting “Use these settings for all
servers” for Domino R6 and later.
WARNING
There are significant changes between Domino R6 and R7 in
how the resource reservation database updates busytime and
autoprocesses meeting requests. These need to be identified during
or after upgrading from R6 to R7 for accurate scheduling to occur,
specifically updating the resourceDB with the R7 template.
