28
RoomWizard
| SYSTEM MANAGER MANUAL
29
LOTUS DOMINO |
RoomWizard
This causes the RoomWizard to query your DNS to learn which
RoomWizard in the group is going to host the GroupView page.
6
Click “Save on ALL Wizards” to ensure that all RoomWizards in the
group know which access address is being used.
The gateway RoomWizard will display a confirmation page
while all other RoomWizards in the group reboot. Wait for all the
RoomWizards to reboot before you proceed to the next step.
7
Click “Continue” to exit the confirmation page.
If you click “Continue” before the RoomWizard restarts, the gateway
RoomWizard’s web page will not be available, and you see a “Unable
to display page” error. If this occurs, wait for the RoomWizard to
reboot and try again.
Configure a group name and virtual host without DNS
If you do not assign a virtual hostname on your DNS, you must
choose one RoomWizard in the group to act as the host for the
GroupView page. The host RoomWizard must be active on the
network at all times to provide access to the group.
To configure the RoomWizard host:
1
Go to the Setup > Group > Name page of any RoomWizard in the
group. This will become the host RoomWizard.
2
Enter a Group Name.
3
Enter the IP address of the host RoomWizard in the “Virtual Host”
field and add “/GroupView” (this is password is case sensitive) to the
end of the IP address.
For example, if the host RoomWizard’s IP address is 10.10.20.20
enter http://10.10.20.20/GroupView in the “Virtual Host” field.
The host RoomWizard will display a confirmation page while all other
RoomWizards in the group reboot. Wait for all the RoomWizards to
reboot before you proceed to the next step.
4
Click “Continue” to exit the confirmation page.
If you click “Continue” before the RoomWizard restarts, the
gateway RoomWizard’s web page will not be available, and you will
see an “Unable to display page” error. If this occurs, wait for the
RoomWizard to reboot and try again.
