38
749.082 | Z02 | 2015-02-03
EN
4.4 Status
LEDs
A
B
C
D
F
E
G
Fig. 6: Status LEDs on the front side
No.
LED
Description of the LED states
Ⓐ
PWR
On: Device is switched on and ready for operation
Off: Device is switched off
Ⓑ
SYS
Flashes: Router is initialising
Off: A system error has occurred
On: Router is functioning
Ⓒ
WLAN
Flash-
es
4)
:
WLAN is switched on
Off: WLAN is switched off
4)
Ⓓ
Ⓔ
WAN
LAN 1
...
4
Flashes: A device is connected to the relevant port, data is being transferred.
On: A device is connected to the relevant port, data
is not
being transferred.
Off:
No device
is connected to the relevant port.
Ⓕ
USB
On: The USB 3G/4G modem is connected, data is not being transferred.
Flashes: Data is being transferred via the USB 3G/4G modem.
Off: The USB 3G/4G modem is not connected.
Ⓖ
WPS
On: A wireless device has been successfully connected to the network using the WPS
function.
Flashes
2)
A wireless device is connecting to the network using the WPS function. This can
take 2 minutes.
Flashes
3)
A wireless device could not connect to the network using the WPS function.
1)
Note
:
After a wireless device has successfully connected to the network using the WPS function, the WPS LED lights up
for approx. 5 minutes and then goes out.
2)
flashes
slowly
3)
flashes
quickly
4)
Notice
When using WPA/WPA2 encryption, the WLAN LED may remain off after having booted the router if a
connection to the picture frame has not yet been established!
