Steba BM 2, Instructions For Use Manual

Page: 33 / 88

33
The ingredients
are
poorly stirred
and
baked ∙ selected an improper pro-
gram
∙ The lid was opened several
times during operation
∙ Stir resistance is too large so
the kneader cannot rotate
and stir properly.
∙ Select the proper program
∙ Do not open the lid
∙ Check the kneader, and
then operate without load.
If the problem is not fixed,
contact the authorized ser-
vice center.
It is very difficult
to
take bread out ∙ Kneader adheres tightly to
the shaft in bread pan ∙ After taking the bread
out, put hot water into
the bread pan and let the
kneader soak for around 10
minutes, then take it out
and clean.
The display
shows
“HHH” after you
have pressed the
“Start/Stop”
button ∙ The temperature in bread
maker is too high ∙ Press the “Start/Stop”
button and unplug bread
maker. Allow the appliance
to cool.
The motor noise
is
heard but the
dough is not
stirred ∙ Bread pan is fixed improper-
ly or dough is too much ∙ Check whether the bread
pan is fixed properly, as well
as the recipe
The dough rose
too
high. ∙ Too much yeast
∙ Forgot to add the salt.
∙ Try using less yeast
The bread did
not
rise enough. ∙ No or too less yeast
∙ Yeast may have a poor ac-
tivity as water temperature
is too high or yeast is mixed
together with salt
∙ The environment tempera-
ture is lower.
∙ Check the amount and qua-
lity of yeast,
∙ increase the environment
temperature
Bread size is so
large as to push
cover ∙ The amount of yeast, flour
or water is excessive
∙ The temperature in the
room is too high.
∙ Reduce the amount of
ingredients according to the
instructions.
Error code H:HH ∙ Temperature in the device
to hight ∙ Stop program
∙ Let device cool down und
restart after 10 to 15 mi-
nutes